60″ (152.4cm) Z Master® 6000 Series TURBO FORCE®

TURBO FORCE® Cutting Deck
72960

$24,699 inc GST

Key product specifications

  • Deck 60" (152.4cm)
  • Power 31 hp
  • Engine Kawasaki® FX921V V-Twin
  • Feature TURBO FORCE® Cutting Deck
  • 5 year / 1400 hr
Find a local dealer
  • Overview
  • Features
  • Specifications
  • Accessories

When you cover a lot of ground, you need a machine that keeps up. Toro’s Z Master® Professional 6000 Series fits the bill. This 152.4 cm (60 inch) packs the power and comfort you demand. From the powerful 31hp Kawasaki® V-Twin engine, vibration-absorbing deluxe suspension seat to the high-strength steel TURBO FORCE® deck, it’s built to work hard and run at optimal levels.

Exclusive TURBO FORCE Deck

Exclusive TURBO FORCE Deck

High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel

7-Gauge, High-Strength Steel

The TURBO FORCE® deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

A Flat Crisp Cut with Precision Blades

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Handcrafted Seat with Arm Rests

Handcrafted Seat with Arm Rests

Ride in style with a handcrafted high-back seat with arm rests that provides the ultimate in padding and back support.

Rubber Discharge Chute

Rubber Discharge Chute

Trim close without damaging landscape structures or your chute.

Smarter design in a bull-nose bumper

Smarter design in a bull-nose bumper

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimise blowout of debris and dust. The bottom, leading edge of the deck is raised 6 mm, allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf “plowing” during spring and autumn clean-up also is significantly reduced.

Patented Adjustable Baffle

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximise discharge velocity.

Operator Information Centre

Operator Information Centre

The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

Folding Rollover Protection System ROPS

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Cast Aluminium Spindle

Cast Aluminium Spindle

Cools quickly for enhanced durability and performance.

Engine31 hp* Kawasaki® FX 999cc
Fuel Capacity45.4 L
Blade Tip Speed18,500+ ft/min (5,640 m/min)
Caster Tyres33 cm x 16.5 cm – 15.2 cm Flat-Free Semi-Pneumatic
Deck Design80-Grade 7-Gauge 60" (152.4 cm) TURBO FORCE® w/bull-nose bumper
Drive Tyres61 cm x 30.5 cm – 30.5 cm
Adjustable Discharge BaffleStandard, tools-free
Air FilterHeavy-Duty Canister Air Cleaner
Carrier Frame7.6 x 3.8 cm tubular steel
ClutchElectromagnetic
Discharge ChuteRubber
Drive SystemUnitized Pumps (16cc/rev) & Wheel Motors (17.1 cir)
Ground Speed18.5 km/h
HeightROPS Height 118.9 cm
Height of Cut2.5 cm x 14 cm
Hour MeterStandard
Hydraulic FluidPremium synthetic
Length211.1 cm
ROPSFolding; standard
SeatHandcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Spindle BearingsMaintenance free ball bearings
Spindle Housing22.9 cm diameter cast aluminum
Steering Controls4.1 cm diameter grips; adjustable, dampened
Weight568.8 kg
Width156.7 cm with Deflector up, 192.3 cm with Deflector down
E-Z Vac Twin Bagger

E-Z Vac Twin Bagger

Quick-release design makes it easy to switch between bagging and side-discharge without using tools.

18″ Seat Cover

18″ Seat Cover

18” (45.72cm) seat cover with armrest. Makes old seats look new and protects new seats. Cushioned cover is water-resistant and has an elastic cord for a custom fit.

E-Z Vac Dump-From-Seat Collection System

E-Z Vac Dump-From-Seat Collection System

Electric Lift Kit

Electric Lift Kit

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers.

60″ (152.4cm) Z Master® 6000 Series TURBO FORCE® videos

Subscribe for mowing tips

The latest news, articles, and resources.

We care about the protection of your data, read our privacy policy

Contact your dealer for details on all warranties.

* Battery manufacturer rating = 60V maximum and 54V typical usage. Actual voltage varies with load.